Next-Gen Bitcoin mining firmware. Auto-tunes every chip. Cuts reboot time to 3 minutes. Delivers up to 20% lower power cost.
Engineered for Whatsminer® and Antminer® fleets, BixBit Firmware unlocks maximum efficiency across every miner — from 5 to 5,000+ units — all optimized in under 60 minutes.
BixBit Firmware transforms standard miners into precision-tuned machines — delivering higher output, lower costs, and faster uptime across your entire fleet.
Every ASIC Perfectly Tuned
BixBit Firmware automatically analyzes and calibrates every ASIC — sometimes hundreds per board — to its most efficient operating frequency.
No wasted watts, no uneven boards, and no manual tuning headaches.
Your fleet runs cooler, more stable, and more profitable from day one.
Up to 70–80% higher hashrate potential vs. factory presets.
Faster Recovery After Curtailments
Stock firmware can take 15–45 minutes to reboot after power events, eating into daily revenue.
BixBit’s Quickstart feature brings miners back online in just 3 minutes, protecting up to 3% of daily income during curtailments.
Get back to full hashrate faster and keep operations running at peak efficiency.
Up to 70–80% higher hashrate potential vs. factory presets.
More Bitcoin Per Watt
BixBit Firmware reduces total power consumption up to 20%, creating measurable savings across your entire operation.
Even a modest 7% efficiency gain can save $60,000+ per MW each year — all while maintaining or improving hashrate output.
Run leaner, cooler, and more profitable with every kilowatt you buy.
Backed by real-world data — verified through commercial mining deployments.
Secure your setup and start tuning your miners for maximum efficiency.
Proven Results In Live Mining Operations
When Cormint Mining deployed BixBit Firmware across its 25 MW operation, the results were immediate — faster restarts, higher uptime, and measurable revenue gains.
Testing conducted on Whatsminer M30S++ VH85 110T and M50 VH40 118T models under identical conditions.
BixBit Firmware was field-tested under real-world conditions at Cormint’s 25 MW immersion-cooled facility, operating 4,600 Whatsminer M30S++ units.
The objective was simple — reduce startup time and recover lost hashrate during curtailments.
The outcome exceeded expectations:
4-minute average reboot time (vs. 20 minutes stock)
60% reduction in lost revenue during curtailments
Consistent power and hashrate stability across 4,600 miners
Experience the same performance gains proven in 25 MW+ commercial operations.
Choose Your Optimization Tier
BixBit Firmware is distributed for free and powered by a small developer fee — ensuring every miner, from small farms to industrial-scale operations, can access the same efficiency technology that powers 40,000+ devices.
Basic
Ideal for: Up to 9 miners or small test deployments. Perfect for individual operators or small-scale farms that want to unlock higher hashrate and lower energy costs with minimal setup.
4-minute average reboot time (vs. 20 minutes stock)
60% reduction in lost revenue during curtailments
Consistent power and hashrate stability across 4,600 miners
No change in performance efficiency at full load
Per-chip Auto-Tune
Profitability Control
Per-Chip Overclocking
ASIC Boost - Reduce energy cost by up to 20%
Custom security alerts & features
Works for air, immersion, & hydro mining operations
Connect with our engineers to configure your firmware and deployment setup.
Enterprise
Ideal for: 100+ miners or multi-megawatt operations. Enterprise-scale firmware built for uptime, automation, and operational control. Fully customizable to your operation.
Schedule a enterprise demo call and discover how BixBit Firmware can transform for your mining operation.
All tiers include continuous OTA updates and access to setup guides, help desk, and support resources.
Every Feature Designed for Performance and Control
Automation
The automatic update and tuning provided by the ASIC custom firmware saves user's time by eliminating the need of repetitive procedures.
Profitability Control
Depending on the situation, you can switch between modes of maximum energy efficiency and ultimate performance.
Overclocking
The firmware ensures proper overclocking of each individual chip! Combined with the immersion type of cooling, you can achieve really great hashrate numbers for your miners.
ASIC Boost
This technology allows miners to lower energy consumption while maintaining their efficiency on the SHA-256 algorithm. Power consumption decreases by ~10-20%.
Security
Alarm for the user on unauthorized changes of the pool. Strong 2FA authentication and SSH access control.
Immersion cooling
The microprogram is compatible with the most efficient type of device cooling, allowing ASICs to run fanless without resorting to bypasses.
Statistical Data
Your personal BixBit AMS account helps you keep track of various things during the miners' work for later analysis over a period of time.
Notifications
Flexible notifications and events configuration: hashrate drop, overheating, pool change, etc.
Equipment Safety
The software stops the mining process if critical temperatures are reached on particular mining units or if there is a problem with the fans.
Get all these features in a single intelligent firmware upgrade.
One Dashboard. Total Control.
BixBit Firmware is the foundation of a fully integrated mining ecosystem — uniting power, cooling, automation, and monitoring into a single intelligent platform.
No more juggling five dashboards or three different systems.
With BixBit, your firmware, cooling, and power infrastructure all speak the same language.
From one interface, you can:
Monitor temperature, load, and uptime across all miners
Adjust settings and power levels remotely
Receive automated alerts through the AMS
Trigger smart responses via PDUs and CDU systems
Train staff on one unified platform instead of multiple disconnected tools
Your result:
Less complexity. Fewer failure points. A faster, more profitable mining operation that scales effortlessly.
Since 2016, BixBit USA has led in immersion cooling and firmware innovation — delivering scalable, energy-efficient systems that maximize performance and reliability.
Clients in 16+ countries Including UAE, Malaysia, Taiwan, New Zealand, Germany, Italy, Portugal, and the USA
Here are answers to the most common questions from miners and operators upgrading to BixBit Firmware.
BixBit Firmware is distributed for free — there's no upfront purchase required. It operates on a small developer fee, which automatically deducts between 1–2.8% of hashrate depending on your tier (Basic, Pro, or Enterprise).
BixBit Firmware currently supports all Whatsminer ASICs (including 2024+ versions) and Antminer S19, S21, T19, T21, and L7 series. Enterprise users can request custom optimization for any model or environment.
Our proprietary mass-deployment loader allows you to update 5 to 5,000+ miners in under 60 minutes. Once installed, each miner runs a 20-minute auto-profiling process that calibrates every chip for optimal efficiency.
No. BixBit Firmware is designed to operate within safe voltage and frequency parameters. It optimizes rather than overextends, maintaining full hardware safety margins.
Most users report 10–20% lower power draw and up to $60,000+ in annual savings per MW. Even modest efficiency gains translate to major bottom-line improvements.
BixBit Firmware's Quickstart feature reboots miners in about 3 minutes, compared to 15–45 minutes for stock firmware — protecting 1–3% of daily revenue during curtailment cycles.
Yes. BixBit Firmware connects seamlessly to the BixBit AMS (Automated Monitoring System), Smart PDU, racks, and hydro containers — creating one dashboard for complete site control. It also supports API integrations with Foreman, Luxor, and Hiveon.
No. BixBit Firmware operates via a secure, cloud-based platform for real-time data access, updates, and monitoring. This ensures the latest performance improvements and safety features are always active.
All users receive access to our Help Desk, installation guides, and setup videos at help.bixbitusa.io. Pro and Enterprise users receive priority engineering support and can book a direct call with our team.
Submit your details through the pop-up form or "Book Your Optimization Call" button. Our team will validate your deployment size and connect you with an engineer to configure your upgrade.
Smarter. Faster. More Profitable Mining Starts Here.
BixBit Firmware is proven to reduce energy costs, recover lost uptime during curtailments, and optimize every chip for maximum performance. Join operators worldwide who’ve turned their firmware into a profit-generating system.
Distributed for free | Developer fee automatically applied during operation
Request Your MDC 4.0 Quote
Submit your configuration — our engineering team will prepare pricing and drawings within 72 hours.
Request Your MDC 4.0 Quote
Submit your configuration — our engineering team will prepare pricing and drawings within 72 hours.
Request Your Hydro-Cooled Container Quote
Submit your configuration — our engineering team will deliver pricing and drawings within 24 hours.
Start overclocking with our custom firmware
Unlock the full potential of your Bitcoin mining hardware with our overclocking firmware. Safely and easily increase your hashrate, resulting in higher profitability and faster ROI.
We respect your privacy and will never share your email address with anyone else.
Contact Sales
Want to talk to sales before requesting a quote? Drop a note.
We respect your privacy and will never share your email address with anyone else.
